AudioCodes 300HD Series, Administrator'S Manual

Page: 62 / 110

320HD IP Phone
Administrator's Manual 62 Document #: LTRT-08107
4.2.3 Provisioning Parameters
Table 4-7: Provisioning Configuration File Parameters
Parameter Description
Note: To add a value to these parameters, enter
provisioning
/ followed by the parameter name equals
the value (e.g.
provisioning/method
=
dynamic
).
provisioning/method Defines the provisioning method:
ƒ
[Disable] Disable - Automatic update is disabled. The phone attempts to
upgrade its firmware and configuration
ƒ
[Dynamic] DHCP Options (Dynamic URL) (default) - Using DHCP options
160 or 66/67 for provisioning
ƒ
[Static] Static URL - Using Static URL for provisioning
provisioning/firmware/ur
l The static URL for checking the firmware file. The URL must be entered using
one of the following syntax options:
ƒ
<protocol>://<server IP address or host name>
ƒ
<protocol>://<server IP address or host name>/<firmware file name>
Where <protocol> can be one of the following protocols: “ftp”, ”tftp”, ”http” or
“https”. For example:
ƒ
tftp://192.168.2.1 – retrieved firmware file is 320HD.img
ƒ ftp://192.168.2.1/Different_Firmware_Name.img - retrieved firmware file is
Different_Firmware_Name.img
Note: This parameter is applicable only when method is configured to
“Static”.
provisioning/configurati
on/url The static URL for checking the configuration file. The URL must be entered
using one of the following syntax options:
ƒ <protocol>://<server IP address or host name>
ƒ <protocol>://<server IP address or host name>/<configuration file name>
Where <protocol> can be one of the following protocols: “ftp”, ”tftp”, ”http” or
“https”. For example:
ƒ
http://192.168.2.1 - configuration file name is <MAC Address>.cfg, for
example, 001122334455.cfg
ƒ
https://192.168.2.1/320HD_<MAC>_conf.cfg - retrieved configuration file
name is 320HD_<MAC Address>_conf.cfg, for example,
320HD_001122334455_conf.cfg
Note: This parameter is applicable only when method is configured to
“Static”.
provisioning/period/type Defines the period type for automatic provisioning:
ƒ
[hourly] Hourly - Sets an interval in hours.
ƒ
[daily] Daily (default) - Sets an hour in the day.
ƒ
[weekly] Weekly - Sets a day in the week and an hour in the day.
ƒ
[powerup] On Power-up Only - The phone tries to upgrade only after
power-up.
provisioning/period/hour
ly/hours_interval
The interval in hours for automatically checking for new firmware and
configuration files.
The valid range is 1 to 168. The default is 24.
Note: This parameter is applicable only when
type
is configured to “hourly”.