AudioCodes 300HD Series Administrator'S Manual Download Page 74

Page: 74 / 110

320HD IP Phone

Administrator's Manual

Document #: LTRT-08107

Parameter

Description

voip/signalling/sip/prack
/enabled

Determines whether the phone sends PRACK (Provisional Acknowledgment)
messages upon receipt of 1xx SIP reliable responses.

[0]

Disable

[1]

Enable (default)

voip/signalling/sip/rport/
enabled

Determines whether the phone adds the ‘rport’ parameter to the relevant SIP
message (in the SIP Via header).

[0]

Disable (default)

[1]

Enable

voip/signalling/sip/sdp_i
nclude_ptime

Determines whether the phone adds the PTIME parameter to the SDP
message body.

[0]

Disable (default)

[1]

Enable

voip/signalling/sip/keepa
live_options/enabled

Determines whether keep-alive is performed using SIP OPTIONS messages
sent to the Proxy.

[0]

Disable (default)

[1]

Enable

voip/signalling/sip/keepa
live_options/timeout

Defines the Proxy keep-alive time interval (in seconds) between Keep-Alive
messages.
The valid range is 0 to 86400. The default value is 300.

voip/signalling/sip/conn
ect_media_on_180

Determines whether the media is connected upon receipt of SIP 180, 183, or
200 messages. When the parameter is disabled, media is connected upon
receipt of 183 and 200 messages only.

[0]

Disable (default)

[1]

Enable

voip/signalling/sip/block
_callerid_on_outgoing_c
alls

When enabled, the outgoing INVITE message is sent with an anonymous
From header and P-Asserted-Identity

header.

[0]

Disable (default)

[1]

Enable

For example:

FROM

header contains anonymous URI:

From: "Anonymous" sip:[email protected]

P-Asserted-Identity

header:

P-Asserted-Identity:

"1001" [email protected]

voip/signalling/sip/anon
ymous_calls_blocking

When enabled, incoming INVITE messages with anonymous From header are
rejected.

[0]

Disable (default)

[1]

Enable

For example:

From:"Anonymous"<sip:[email protected]>

The phone responds with a SIP 403 “Forbidden” response.

Summary of Contents for 300HD Series















































































































Search results

Summary of Contents for 300HD Series

Reviews:

Related manuals for 300HD Series

Brands by name

Popular brands

AudioCodes 300HD Series, Administrator'S Manual

Search results

Summary of Contents for 300HD Series

Reviews:

Related manuals for 300HD Series

Brands by name

Popular brands