AudioCodes 300HD Series, Administrator'S Manual

Page: 60 / 110

320HD IP Phone
Administrator's Manual 60 Document #: LTRT-08107
Parameter Description
system/ntp/daylight_savi
ng/end_date/month The month in a year.
The valid range is 1 to 12.
system/ntp/daylight_savi
ng/end_date/day The day in a month.
The valid range is 1 to 31.
system/ntp/daylight_savi
ng/end_date/hour The hour in the day
The valid range is 0 to 23.
system/ntp/daylight_savi
ng/end_date/minute The minute in an hour.
The valid range is 0 to 59.
system/ntp/daylight_savi
ng/offset The offset value for the daylight saving.
The valid range is 0 to 180. The default offset is 60.
4.2.1.5 Network Time Protocol (NTP) Server
Table 4-5: Network Time Protocol (NTP) Server Configuration File Parameters
Parameter Description
system/ntp/enabled
Enables the NTP server from which the phone retrieves the date and time.
ƒ
[0] Disable (default)
ƒ [1] Enable – obtains the time information from a configured NTP server
system/ntp/primary_serv
er_address Defines the address of the main NTP server (this can be a domain name, for
example, tick.nap.com.ar).
system/ntp/secondary_s
erver_address Defines the address of the secondary NTP server.
system/ntp/sync_time This sub-section defines how often the phone must perform an update with
the NTP server.
ƒ
[days] - defines the number of days
ƒ
[hours] - defines the number of hours
For example: To configure the phone to perform an update with an NTP
server every 1 day and 6 hours, set the following:
system/ntp/sync_time/days=1
system/ntp/sync_time/hours=6
system/ntp/sync_time/da
ys The number of days.
The valid range is 0 to 7. The default of days is 0.
system/ntp/sync_time/h
ours The number of hours.
The valid range is 0 to 24. The default is 12.