AudioCodes 300HD Series Administrator'S Manual Download Page 67

Page: 67 / 110

Administrator's Manual

4. Configuration File-based Management

Version 1.4

July 2010

Parameter

Description

voip/line/%d/auth_passwo
rd

Password provided to you from the VoIP Service Provider. This is used
when sending a response to Unauthorized or Proxy Authentication
Requested (401/407).

The authentication password can be up to 35 characters.

voip/line/%d/do_not_distu
rb/activated

Activates the Do Not Disturb (DnD) feature, if enabled, using the parameter

voip/services/do_not_disturb/enabled

[0]

(default) - Activate

[1]

- Deactivate

Notes:

DnD can also be activated

using the LCD screen interface (more

common).

4.2.5.2 Gain Parameters

4.2.5.2.1 General Parameters

Table

4-10: General Gain Configuration File Parameters

Parameter

Description

Hands-free Gain Parameters

Note:

Values are in decibels (dB) and represented as follows:

Negative values: use the word “minus” (e.g. =minus9db).

Positive values: use the word “plus” (e.g. =plus9db).

Decimal places: use underscore instead of period (e.g. plus19_5db).

voip/audio/gain/additional_
speaker_gain

Additional parameter for speaker gain configuration.

[0]

0dB

[1]

1dB

[2]

2dB

[3]

3dB (default)

voip/audio/gain/tone_signa
l_level

Call progress tone volume. This volume can be modified on-the-fly by
pressing the phone’s VOLUME key in certain scenarios.

The valid range is 1 to 31 (-dB). The default value is 10 (-10dB).

voip/audio/gain/ringer_sig
nal_level

Ringing tone volume. This volume can be modified on-the-fly by pressing
the phone’s VOLUME key when the phone is in idle state.

The valid range is 0 to 63:

[0]

- Mute

[1]

- -31 dB

[32]

- 0 dB

[63]

- 31 dB

Summary of Contents for 300HD Series















































































































Search results

Summary of Contents for 300HD Series

Reviews:

Related manuals for 300HD Series

Brands by name

Popular brands

AudioCodes 300HD Series, Administrator'S Manual

Search results

Summary of Contents for 300HD Series

Reviews:

Related manuals for 300HD Series

Brands by name

Popular brands