19
Rev.2.10
●
AUDIO OUT connection
Connect the audio input of a network camera or similar level input to the AUDIO OUT connector of this unit. The line output of
this terminal is a mono output. Cables should be selected depending on the connector types of devices to be connected and
follow the description below to connect external devices.
Wiring the Euroblock connector
■
1. A detachable Euroblock connector is provided for this unit’s connectors. As shown in the figure below,
insert a slot-head screwdriver into the gap, and remove the Euroblock connector from this unit.
2. Connect the wires to the Euroblock connector. Using a slot-head screwdriver, loosen the Euroblock
connector screws, peel off the insulating material around each of the wires, twist the conductors firmly, insert
the ends of the conductors into the Euroblock connector, and tighten the Euroblock connector screws.
（
Fix cables using the supplied tying band.
）
Note: • Stranded wire is highly recommended.
• Wire insulation must be removed.
• Do not use solder to tin the wire.
• The recommended maximum cable length is 15 m {49 feet}.
