8
Rev.2.10
Operating procedures
1.
A standard CAT5 or CAT5e cable is used to connect to the amplifier. Turn on the amplifier.
The POWER LED of the receiver lights green.
2. Power ON the microphone.
[K-STD14]: Press and hold the [PWR/MUTE] button for one second.
[K-SHH14]: Push [TALK] button or flip up the [TALK] switch.
The MIC1 or MIC2 LED indicator of the lights green (depending on a channel to be received.)
3. Adjust the volume of external devices such as an amplifier.
The overall volume is adjusted with the external amplifier or the like. Use volume buttons on the Teacher Microphone (K-
STD14) to adjust the volume. Adjust the volume of the other microphone or LINE IN by pressing the Select button on the K-
STD14.
4. The LED of the POWER/MIC1/MIC2 indicates the operating state of this unit during operation.
LED
POWER indicator
MIC1/MIC2 indicator
E2 signal output provided*
Lights red
Lights red
(lights green at E2 ACK input provided)
E1 signal output provided*
Lights green
Lights red (for 300 ms)
Page mute signal input provided
Lights yellow
Lights yellow
Microphone volume operated*
Lights green
No light (for 300 ms)
Feedback blocker operated
Lights green
Lights yellow (for 5 sec)
During audio link
Light green
Lights green
* Only applicable when K-STD14 is used
5. The LED of the LINK indicates the operating state of this unit during operation.
During audio link with the WAP
Lights green
During pairing registration
Blinks yellow at 500 ms period
System error
Lights red
