6
Rev.2.10
Major operating controls and their functions
[1]
[LINK] button
Pressing this button will put the receiver into register mode to pair with a microphone.
(This register mode is canceled after 20 seconds)
Refer to operating procedures
(At the time of E2 state, the button operation is invalid)
[2]
[POWER] POWER indicator
(Green/Yellow/Red)
This LED lights green when the power is on and this unit can receive signals under normal conditions.
This LED lights as follows to indicate other states:
E2 signal output provided: lights red
Page mute signal received: lights yellow (It glows red when in E2 state)
[3]
[MIC1/MIC2] MIC1/MIC2 indicator
This LED lights green when this unit is receiving signals from each microphone under normal conditions.
This LED lights as follows to indicate other states:
E2 signal output provided: lights red
Page mute signal received: lights yellow (It is red indication at the time of E2 state)
E1 signal output provided: lights (300 ms) red
Feedback blocker in operation: lights (5 sec) yellow
[4]
[LINK] LINK indicator
This LED lights green during Audio link with the WAP or when a media microphone is paired with the third channel
This LED blinks yellow (500 ms) during pairing registration
This LED lights red when the link connection to the WAP is broken. (DIP switch 2-8 = ON) or system error.
9
8
7
6
5
4
1
2
3
3
10
