Atwood SCALE-O-MATIC S302, Operation And Safety Manual

Page: 4 / 53

AM MFG. CO. MASTER MODEL:
DIV. OF ATWOOD CORP. S302
© 2011
S302_2 2 1/11
OPERATIONS AND SAFETY MANUAL
INCLUDING PARTS CATALOG
READ AND FAMILIARIZE YOURSELF WITH THIS MANUAL BEFORE OPERATING THIS MACHINE
FOLLOW INSTRUCTIONS DURING USE
INTRODUCTION
THE SCALE-O-MATIC MODEL – S302 DOUGH DIVIDER IS DESIGNED TO GIVE YOU OPTIMUM TIME AND
LABOR SAVING SERVICE WITH A SPEED OF APPROXIMATELY 2000 PIECES PER HOUR. THE S302 CAN
ACCURATELY SCALE FROM 1 oz. TO 32 ± ¼ oz. WITH THE PROPER ATTACHMENTS. NEW AND CURRENT
EMPLOYEES CAN BE TAUGHT TO OPERATE THIS MACHINE EFFICIENTLY AND SAFELY IN A SHORT PERIOD
OF TIME. WE URGE YOU TO STUDY THIS OPERATION AND SAFETY MANUAL FOR FULL BENEFITS….
CAUTION:
ALL OPERATORS MUST BE FULLY TRAINED AND INSTRUCTED IN SAFETY PROCEDURES
BEFORE BEGINNING PRODUCTION.
SPECIFICATIONS
INSTALLATION INSTRUCTIONS
LOCATION:
SELECT LOCATION CAREFULLY. THE AREA SHOULD PROVIDE THE OPERATOR WITH ENOUGH SPACE TO
USE THE EQUIPMENT IN A SAFE MANNER. THE FLOOR AREA SELECTED SHOULD BE EASY TO CLEAN AND
SHOULD BE FREE OF OIL, GREASE, ETC. AVOID AREAS WHERE BYSTANDERS AND CUSTOMERS MAY BE
PRESENT.
HOPPER CAPACITY 100 lbs.
EXTENDED HOPPER (140 lbs. CAPACITY)
PRODUCTION RATE 2000 PIECES PER HOUR
HEIGHT 58”
LENGTH 64”
WIDTH 24”
SHIPPING WEIGHT 1000 lbs.
DIVIDER 3 PHASE, 2 H.P. MOTOR (STANDARD)
SINGLE PHASE, 1½ H.P. MOTOR
DOUBLE SHEAVE BELT DRIVE
SMALL CONVEYOR 1 PHASE, 1/4 H.P. MOTOR
ROUNDER SCREW 3 PHASE, 1 H.P. MOTOR (STANDARD)
SINGLE PHASE, ¾ H.P. MOTOR
RECIPROCAL MOTION
MECHANICAL DIVIDER
AUTOMATIC SPRING PRESSURE, SELF ADJUSTABLE
EXTRA DIVIDER CUPS AVAILABLE AS OPTIONAL EQUIPMENT.
NO. 1 DIVIDING CUP 1 TO 2 oz.
NO. 2 DIVIDING CUP 2 TO 4 oz.
NO. 3 DIVIDING CUP 4 TO 10 oz
NO. 5 DIVIDING CUP 10 TO 32 oz
VOLTAGES: 3 PHASE, 208 - 230 VOLTS (STANDARD)
3 PHASE, 380 – 480 VOLTS
SINGLE PHASE, 208/220 VOLT (OPTIONAL)
VARIABLE SPEED DIVIDER (OPTIONAL)
CAUTION:
PROPER UNIT INSTALLATION IS NECESSARY FOR SAFE AND EFFICIENT OPERATION.
PROPER INSTALLATION ALSO HELPS PROTECT THE UNIT FROM DAMAGE AND MAKES
SERVICE EASIER.