Atwood SCALE-O-MATIC S302, Operation And Safety Manual

Page: 12 / 53

AM MFG. CO. MASTER MODEL:
DIV. OF ATWOOD CORP. S302
© 2011
S302_10 10 1/11
GUIDE TO CLEANING
STEP 1
USING AN ALLEN WRENCH, LOOSEN SOCKET
HEAD SCREWS (2) AND LIFT PULL OUT DIVIDER
PLUNGER (MEASURING CUP) (3). WHEN A #1, #2 OR
#3 MEASURING CUP IS IMPLOYED ON DIVIDER, THE
DIVIDER CYLINDER MUST ALSO BE REMOVED
FROM SLIDE FOR CLEANING.
STEP 2
LOOSEN EIGHT HEX HEAD BOLTS AT TOP OF GIB
BARS. USING WRENCH (1) REMOVE TWO HEX
HEAD SCREWS (4) AND PUSH DIVIDER SLIDE (5)
REARWARD TO EXPOSE CYLINDER OPENING.
STEP 3
REMOVE CABINET DOOR (6).
STEP 4
WITH CYLINDER OPENING EXPOSED, REMOVE
SEAL SCRAPER RING (7) AND RUBBER “O” RING (8).
CLEAN ALL EXPOSED SURFACES INCLUDING “O”
RING GROOVE AND DIVIDING SLIDE OF
ACCUMULATED DOUGH, OIL, ETC. WIPE EXCESS
DOUGH FROM TOP AND INTERIOR OF CYLINDER.
SCALE - O - MATIC NAME PLATE
THIS PLATE HAS A 2-CHANNEL GROOVE THAT
CATCHES EXCESS OIL AND DRAINS INTO DRIP PAN
AT THE BOTTOM OF THE MACHINE. THIS PLATE
SHOULD BE REMOVED BY LOOSENING AND
REMOVING A SMALL ALLEN SCREW IN THE
CENTER OF THE PLATE. CLEAN PLATE, AND
CHECK PLASTIC DRAIN LINE TO SEE THAT IT IS
CLEAN AND FREE OF ANY SEDIMENT SO OIL CAN
DRAIN PROPERLY. DRIP PAN AT BOTTOM OF
MACHINE SHOULD BE EMPTIED EVERY DAY.
STEP 5
WIPE EXCESS DOUGH FROM INSIDE OF DOUGH
HOPPER.
NOTE:
NEVER USE METAL EDGED SCRAPER FOR
CLEANING ANY PART. USE OF SUCH TOOLS CAN
RESULT IN DAMAGE.
DANGER:
ALWAYS DISCONNECT ELECTRICAL SERVICE WHEN
CLEANING, MAINTAINING OR REPAIRING THIS MACHINE...