ATV KB5000N, Instruction Manual

Page: 32 / 56

24
Chapter 4
— Slave Keyboard Setup
Master keyboard should be setup as following procedure.
1. Check for dip switch the 8
th
of S1
“
OFF
”.
2. Press CTRL + MENU . Check Slave KBD setting
“ON”.
Network
▶
Set Slave KBD
▶
Slave KBD : ON
Network
▶
Set Slave KBD
▶
Slave KBD Unit: ON for the desired slave keyboard
Slave keyboard need to be setup with the following procedure.
1. Check for dip switch the 8
th
of S1 is
“
ON
”.
2. If you setup all connection correctly and turn on slave keyboard, you should see following screen.
←
Current Device ID = 1
←
Default setting is 9 9 9 9 for administrator, 1 1 1 1 for user
←
means that the controller is not connected to master keyboard
3. Press CTRL + MENU . Set the Slave ID to 01
NOTE: Baud rate of slave keyboard is fixed with 9600 bps
Ver x.x Slave1
Password : xxxx
Not connected!
MAIN MENU
1.Configuration
2.Network
3.LCD
4.Initialization
Exit(ESC)
Configuration
1.Key Beep : ON
2.key Lock : OFF
3.Chg User PW
4.Chg Admin PW
Save and Exit
Network
1.Keyboard ID : 01
2.BPS:9600
Save and Exit
LCD
1.Contrast :03
2.Backlight :ON
Save and Exit