ATV KB5000N, Instruction Manual

Page: 25 / 56

17
RS232 2400~38400 None/DVR1-5/PC-DVR/AUX IN
KBDDUP: Ke Duplex Multiplexer
KBDTRI: Ke Triplex Multiplexer
AUX IN: outputs the auxiliary signal input to Dome1 (FASTRAX,PELCO only)
NOTE: When the DVR is selected at a port, the other port displays the same DVR only.
To change the DVR number at the other port, first change the current DVR number to none.
USB
Menu Status Configuration
USB
ON Client Keyboard : Only USB Port(The other ports and s lave keyboards
are not supported)
OFF General Keyboard : Dome1/Dome2/RS232(The USB port is not
supported)
MUX Config (Multiplexer Configuration)
This screen allows you to set multiplexer switching settings when you select the camera by pressing NO +
CAM . Up to 64 Cameras can be installed using 5 MUXs and 4 keyboards. It is equivalent to a 64x4 matrix
system. Each four users can view one of 64 cameras to his own SPOT(AUX) monitor.
This menu is for assignment when multiplexers are installed in two levels. Two levels means that spot
outputs of the first level multiplexers is connected to the video input of the second level multiplexer.
Press
NO + CAM will display the selected camera on the spot output of the second level multiplexer.
MUX Channel : NO (no use), 16, 28, 32, 48, 64
– Select the MUX channel number used in the multiplexer
configuration.
When you select the desired number, the MUX configuration table is made automatically according to the
number as the figure 8.
When the configuration is different from the auto-setting, you can change the value individually as below.
MUX Config
1.MUX Channel : 16
2.Set MUX A
3.Set MUX B
Save and Exit
3.USB : ON
3.USB : OFF