ATTO Technology FibreBridge 3300R, Installation And Operation Manual

Page: 20 / 58

15
ATTO Technology FibreBridge 3300D Installation and Operation Manual
7.1.1 General use commands
The CLI commands outlined in this chapter get information or perform functions which are used in a
variety of situations with the FibreBridge.
CLI commands are case insensitive (upper and
lower case allowed anywhere).
Commands generally follow a standard format:
[Get | Set] Command [Parameter 1 | Parameter 2]
followed by the return or enter key.
FibreBridgeModel
Reports model information about a specific FibreBridge
Action: none Information: get FibreBridgeModel
Returns:
FibreBridge 3300
8
2001 ATTO Technology, Incorporated
Firmware version mm..mm release date mm.dd.yyyy, hh:mm:ss
Build zzzz
FibreBridgeName
Specifies the eight-character name assigned to the FibreBridge used to identify individual FibreBridge units. It is not the World Wide Name (WWN).
Actions: set FibreBridge Name [value] Information: get FibreBridgeName
SaveConfiguration
Help
Displays a list of available commands. If command name is specified, displays detailed command-specific information.
Action: none Information: Help [command name]
Info
Displays version numbers and other production information for key components within the FibreBridge
Action: none Information: Info
Return:
Device = “FibreBridge 3300”
Serial Number = PPPnnnnnn
Device Version = xxxx
Device Build = xxxx
Build Date = Month Day Year ‘Build Time’
NVRAM Revision = xx
CLI Revision = x.xx
FC Firmware Revision = x.xx.xx
FibreBridge name = xxxxxxxxxx
World Wide Name 0 = xx xx xx
SCSI Port 0 = “[SE | HVD | LVD | UNKNOWN ]”
IsReserved
Displays the reservation status of the current FibreBridge session/interface. If set, the configuration image is being modified by another FibreBridge
services session: set commands are temporarily unavailable but information commands are available. Executing a SaveConfiguration,
RestoreConfiguration or FirmwareRestart RELEASES the FibreBridge so that other services users may access it.
Limits: When FibreBridge services interface is RESERVED, set commands from other users are unavailable.
At least one interface must always have access to the FibreBridge.
Action: none Verbose return:
Part Identifier: PPPPPPP Sequence Number: nnnnnn