24
SC
SI
c
onfi
gurati
on
command
s
ScsiPortTaggedQueuing
Specifies whether tagged command queuing is allowed on the SCSI port.
Limits: [enabled | disabled]
Default: enabled
Action: set ScsiTaggedQueuing [sb [enabled|disabled]] Information: get ScsiTaggedQueuing [sb]
SaveConfiguration
ScsiPortWideTransfer
Specifies whether wide SCSI transfers should be negotiated.
Default: enabled
Action: set ScsiPortWideTransfer [sb[enabled|disabled]] Information: get ScsiPortWideTransfer [sb]
SaveConfiguration
ScsiTargets
Returns a list of SCSI devices operational on the referenced SCSI port.
Action: none
Information: ScsiTargets [sb]
Returns: [line count]
[sb] [st] [sl] [device type] [vendor ID] [product ID] [revision] [serial
number]
ScsiTermination
Configures/reports the SCSI internal termination of the SCSI port identified.
Default: enabled
Action: set ScsiTermination [sb [enabled | disabled ] ]
Information: get ScsiTermination [sb]
SaveConfiguration
SpeedWrite
When enabled, improves the performance of FCP WRITE commands to SCSI devices attached to the FibreBridge.
Limits: Specify SCSI bus (sb), target (st), LUN (sl) of a mapped SCSI device or (all) for each currently mapped device
Action: set SpeedWrite [sb st sl|all] [enabled|disabled]
Information: get SpeedWrite [sb st sl|all]
SpeedWriteDefault
When enabled, SpeedWrite performance enhancement is set as the default for any subsequent SCSI devices mapped manually or via an AutoMap
operation. If disabled, the FibreBridge will not attempt SpeedWrite performance enhancement to newly-mapped SCSI devices.
Action: set SpeedWriteDefault [enabled | disabled]
Information: get SpeedWriteDefault
Summary of Contents for FibreBridge 3300R
Page 2: ......
