69
69
Rebuilding to self-closing door after, the oven has been built in.
The door is made self-closing by dismantling some of the door’s counterweights. On the VISIO 1
& 3, the counterweights must be changed on both sides.
1. Remove the Side Skamol sheet
.
2. Remove the access panel
.
3. Unscrew the retaining ring (Allen key 2.5mm). Remove
the required number of counterweights, so that the door
closes slowly and at a constant speed. Check its operation
.
4. Tighten the retaining ring (Allen key 2.5mm)
.
5. Refit the access panel and side Skamol sheet
.
Access panel.
Retaining ring.
Counterweights.
Retaining ring.
Access panel.