68
68
Rebuilding to a self-closing door before, the oven is built in.
The door is made self-closing by dismantling some of the door’s counterweights. On the VISIO 1
& 3, the counterweights must be changed on both sides.
1. Remove the transport lock and the screws on the coun-
terweight cover
Transport lock.
2. Remove the counterweight cover by pulling it up
.
Counterweight cover.
3. Remove the retaining ring (Allen key 2.5mm). Remove
the required number of counterweights, so that the door
closes slowly and at a constant speed. Check its operation
.
Counterweights
4. Tighten the retaining ring (Allen key 2.5mm).
Retaining ring
5. Attach the counterweight cover and screw in the
screw(s).
Counterweight cover.
Retaining ring