manualshive.com logo in svg

attika RAIS VISIO 1, User Manual, Page: 3 / 70

Share
Download
attika RAIS VISIO 1 User Manual Download Page 3

8

VISIO

  10

  28-03-2017

8

English 

RAIS/

attika

 - User manual for VISIO

Revision :

Date :

INTRODUCTION ......................................................................................................................9
WARRANTY ..........................................................................................................................10
SPECIFICATIONS ...................................................................................................................11
DISTANCES ...........................................................................................................................12
CONVECTION .......................................................................................................................17
MATERIAL SELECTION ...........................................................................................................17
CHIMNEY .............................................................................................................................18
INSTALLATION INSTRUCTIONS ..............................................................................................20
INSTALLATION ......................................................................................................................21
INSTALLATION DISTANCES ....................................................................................................21
MOUNTING THE REFLEKTOR PLATE .......................................................................................22
REMOVING THE TRANSPORT SAFETY ...................................................................................23
VISIO 1 - BUILT-IN DIMENSIONS .............................................................................................24
VISIO 1 - INSTALLATION DISTANCES ......................................................................................29
VISIO 2 - BUILT-IN DIMENSIONS .............................................................................................35
VISIO 2 - INSTALLATION DISTANCES ......................................................................................40
VISIO 3 - BUILT-IN DIMENSIONS .............................................................................................46
VISIO 3 - INSTALLATION DISTANCES ......................................................................................48
AIR-SYSTEM .........................................................................................................................54
FOR THE INSTALLER ..............................................................................................................54
FUEL .....................................................................................................................................55
DRYING AND STORAGE ........................................................................................................56
REGULATING THE COMBUSTION AIR ....................................................................................56
ROOM VENTILATION .............................................................................................................56
USING THE WOOD BURNING STOVE.....................................................................................57
FIRST USAGE ........................................................................................................................57
LIGHTING AND FUELLING .....................................................................................................58
CONTROL .............................................................................................................................59
WARNING ............................................................................................................................60
CLEANING AND CARE ..........................................................................................................61
CLEANING THE DOOR GLASS - VISIO 1 .................................................................................62
CLEANING THE DOOR GLASS - VISIO 2 .................................................................................63
CLEANING THE DOOR GLASS - VISIO 3 .................................................................................64
CLEANING THE COMBUSTION CHAMBER .............................................................................65
CLEANING OF FLUE WAYS ....................................................................................................65
INTERRUPTION OF OPERATION ..............................................................................................66
CONVERSION TO SELV CLOSING DOOR ................................................................................68
ACCESSORIES .......................................................................................................................70
SPARE PARTS VISIO 1 ............................................................................................................72
SPARE PARTS VISIO 2 & 3 ......................................................................................................73
DECLARATION OF PERFORMANCE ........................................................................................74

Summary of Contents for RAIS VISIO 1







































































Reviews:

No comments