ATTACK DP PROFI, Instructions For Use Manual

Page: 13 / 40

12
Display
Parameter
Min Max Step
Production
settings
∏100
Max. Operation output of ventilator or max. output, when
∏r 0-10
50 100 1% 100
n 40 Minimum output of ventilator 20 40 1% 40
∏h 10 Ventilator speed, decrease of coefficient 2 40 1 10
∏r 1 Automatic control of fan rotations and time of fan start - -, 0 10 1 1
∏n 5 Time of ventilator operation - -, 5 60 1s 5
∏u 6 Time of ventilator pause 1 99 1min 6
∏d 3 Time of ventilator operation in manual mode - -, 1 99 1min 3
P 65 Temperature of C.H . pump start-up 60 70 1°C 65
Ph 5 Hysteresis of C.H. pump 1 10 1°C 5
Pr 1
Operation mode of C.H. pump
0- Automatics
1- Pump operation depends on room temperature or on
contacts of the room thermostat.
2- Pump operation depends on operation mode of
regulator
0 2 1 1
Pc -- Pause of C.H. pump - -, 1 99 1min --
Pd 2 Delay to stop the C.H. pump - -, 1 99 1min 2
L 65 Minimum boiler temperature 60 65 1°C 65
H 90 Maximum boiler temperature 80 95 1°C 90
h 5 Hysteresis of boiler temperature 1 10 1°C 5
A 105 Temperature of boiler overheating 95 105 1°C 105
Fc 1
Testing method of fuel shortage:
0- increase of temperature of water in the boiler
1- measuring of flue gas temperature
0 1 1 1
Fd 60 Time of measuring of fuel shortage during boiler start -up - -, 1 99, 4h 1min 60
Fb 30 Time of measuring of fuel shortage during operation - -, 1 99, 4h 1min 30
Ar 0
Operation mode of exceptional output:
0- output of start of separate boiler
1- alarm output
2- output controlling mixing valve
3- output controlling emergency after cooling system
4- output controlling next devices starting during the
operation of the fan
0 4 1 0
Prod Reset of production settings
outP Control of the C.H. pump outP out1
out∏ Control of fan output out∏ out2
outr Control of additional output outr out3
End Exit from service menu
Schedule: List of service parameters