MAN - PAV4 - REV: Original | E. Software Overview
17
The screen will show the current version of the software in the PLC and HMI. This is very important information, and
is most often ask for when calling into ATS service.
IP Address
Used to allow someone at a remote location to monitor the system using a VNC viewer program. There is no
password, but there is no machine control either.
ID
A user ID and should be set to the user access you wish to use.
Password
Associated with the User ID and used to access other screens. When the correct ID and Password are entered other
buttons (colored on the above screen) will be displayed.
Standardize Button
Will not be displayed until the correct ID and Password has been entered. Once it is displayed, pressing it will go to
the standardize screen. (Default ID: 2, Password: 222222).
Passwords Button
Will not be displayed until the correct ID and Password has been entered. Once it is displayed, pressing it will go to
the password screen. (Default ID: 3, Password: 333333).
Settings, Language, Data, and Alarm Buttons
Each take you to their screens which are described later in this section.
Done Button
Will return you to the Main Screen.
E.4 Language Screen
Figure E.14 displays the Language Screen, which is shown when you press the Language Button on the View
Screen. It allows you to set the language used in all the screens.
Simply select your language of choice then press the Done button to go back to the view screen.
