manualshive.com logo in svg

ATS Axsis SC-300H, Operation And Reference Manual

Share
Download
ATS Axsis SC-300H Operation And Reference Manual Download Page 61

 

Operations and Reference Manual 

 

Axsis™ SC-300H Digital Radar Speed Camera 

 

 

2011 American Traffic Solutions, Inc. 

 

 

Page 59

 

 Proprietary and Confidential 

All Materials are subject to change without notice.

 6/30/2011

 

15.9.2 Voids 

A void will d isplay when the system  recognizes a problem with the radar reading.  This may be  

because of multiple veh icles in the  beam, changes in the speed of the vehicle as it passes 

through the beam or other physical reasons that cause the reflected signal to be inconsistent.   

 

Void Tab 

An excessive amount of voids could suggest  t hat there is a problem with the ra

dar or the  

deployment  location. 
 

15.9.3  Last Photo Event Tab 

This is a new tab within the Axsis™ SC-300H Speed Camera System. It allows the user to view 

the images immediately as they happen.  There is a small delay; however, the oper ator will be 

able to see the violation picture righ t from the “Operational Screen” rather than having to stop 

the system to review it. 
While in the  “Operational Screen” you can acce ss the “Last Photo Eve nt” by either clicking on  

the tab titled “Last Photo Event”, or by clicking on one of the last ten violations. 

 

Last Photo Event Tab 

Summary of Contents for Axsis SC-300H















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands