manualshive.com logo in svg

ATS Axsis SC-300H, Operation And Reference Manual

Share
Download
ATS Axsis SC-300H Operation And Reference Manual Download Page 57

 

Operations and Reference Manual 

 

Axsis™ SC-300H Digital Radar Speed Camera 

 

 

2011 American Traffic Solutions, Inc. 

 

 

Page 55

 

 Proprietary and Confidential 

All Materials are subject to change without notice.

 6/30/2011

 

15.6

 

SC-300H

 

S

PEED 

C

AMERA 

S

YSTEM 

–

 

O

PERATIONAL 

S

CREEN

 

Once the previous step s are compl ete, the syst em will do a “Radar Calibration Test ” and then 

the following operational screens will be presented.  

 Current  Settings 

 Violation  Statistics 

 Event  History 

 Pause  Button 

  End Deployment Button 

 

 

SC-300H Speed Camera System – Operational Screen  

 
 
 

 
 

Note:  The operational screen also displays the current operational status in the bottom 
left corner.  The above example shows that the deployment is initializing.  At this point the 
system will reach out to the camera and take test shots and fire the strobe.  Once the 
initial startup diagnostics have been performed and have passed, including a “Self Test”, 
the radar will be “Armed” and operational.

 

Summary of Contents for Axsis SC-300H















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands