manualshive.com logo in svg

ATS Axsis SC-300H, Operation And Reference Manual

Share
Download
ATS Axsis SC-300H Operation And Reference Manual Download Page 49

 

Operations and Reference Manual 

 

Axsis™ SC-300H Digital Radar Speed Camera 

 

 

2011 American Traffic Solutions, Inc. 

 

 

Page 47

 

 Proprietary and Confidential 

All Materials are subject to change without notice.

 6/30/2011

 

14.8

 

R

EVIEWING 

T

EST 

S

HOTS

 

Once you think you have captured a sharp image with a ve hicle in the  appropriate lane, review 

the image on the laptop using Nikon Browser.   

Use the zoom tool to zoom in on the driver or license plate to ensure that they are in 
sharp focus. Then, zoom into any signage or objects in your background.  The driver’s 
faces (or plate) should be the sharpest thing in the photo.  Anything in the background 
should be softer focus.

 

If the plate  is not the sharpest thin g in the ph oto, take an other test shot, and review on the  

laptop.  Repeat this until the photo is in proper focus. 
Once you are satisfied with your focus, set the “Focus Mode Selector” switch to 

M

.  This locks in 

the current camera focus.   
After you have set the  “Focus Mode Selector”  switch to 

M 

it is a  very good idea  to capture  a 

vehicle in all lanes you will be monitoring just to make sure they look good as well. 
 

 

Reviewing Test Shots Work Flow 

 

Note:  Sharp focus is crucial because once the images are compressed, and
loaded for processing, they degrade slightly. 

 

Summary of Contents for Axsis SC-300H















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands