manualshive.com logo in svg

ATS Axsis SC-300H, Operation And Reference Manual

Share
Download
ATS Axsis SC-300H Operation And Reference Manual Download Page 30

 

Operations and Reference Manual 

 

Axsis™ SC-300H Digital Radar Speed Camera 

 

 

2011 American Traffic Solutions, Inc. 

 

 

Page 28

 

 Proprietary and Confidential 

All Materials are subject to change without notice.

 6/30/2011

 

10.3

 

M

EMORY 

C

ARD 

F

ORMATTING

 

To format the memory card, turn the camera “ON”.  
Now, simultaneously pr ess and  ho ld down th e “Format / Mode” and the “Format / Trash”

 

Buttons for approximately two seconds. 
A blinking “For” will appear in the top control panel and the frame count will blink.   
Now, simult aneously press both bu ttons a second time to start the formatting process.  The

 

“Memory Card Access L amp” (by th e memory card door lat ch) will  illuminate.  Once  formatting 

is complete, the green active indicator light will turn off and the frame count display will show the 

number of photos that can be recorded at the current settings. 
 

    

 

Format Memory Card 

 

 

*Note* Formatting memory cards permanently deletes any data they may contain.  

Be sure you are ready to completely clear the card of all data before formatting. 

 

Summary of Contents for Axsis SC-300H















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands