manualshive.com logo in svg

ATS Axsis SC-300H, Operation And Reference Manual

Share
Download
ATS Axsis SC-300H Operation And Reference Manual Download Page 56

 

Operations and Reference Manual 

 

Axsis™ SC-300H Digital Radar Speed Camera 

 

 

2011 American Traffic Solutions, Inc. 

 

 

Page 54

 

 Proprietary and Confidential 

All Materials are subject to change without notice.

 6/30/2011

 

15.5

 

T

IME AND 

D

ATE 

E

NTRY AND 

C

ONFIRMATION

 

Proceed to the Time and Date Verification window.  The displayed time and date are taken from 

the system’s laptop.  

Verify the time with a cell phone as the laptop time may be incorrect. 

Make any changes necessary and then click th e time and date confirmation box.  Note that any 

changes made to the time and/or date will also update the laptop to maintain synchronization.   

 

Time and Date Entry and Confirmation 

Checking the box next to “Time and date are co rrect”, will confirm the “Current Time and Date” 

by graying  them out. T he “Next” b utton w ill now be highlighted to enable advancing to th

e 

operational screen. 

 

Time and Date Entry are Correct 

Note:  Please be sure that the correct time, date, month and year is selected.  Any 
incorrect selections will result in erroneous data being applied to all violation images 
captured for the subsequent deployment. 

Summary of Contents for Axsis SC-300H















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands