Atop Serial Device Server
SE5002D
User Manual V. 1.1
4.5
Serial/IP Advanced Settings
In the Serial/IP Control Panel, Click on the
Advanced
button to open Advanced Settings
window,
Fig. 4. 16
. Click on
Use Default Settings
to load the default settings.
Fig. 4. 16
Extend Server Connection;
maintains the TCP connection for a specified amount of time
after the COM port is closed.
Attempt Server Connection;
terminates pending connection attempts if they do not
succeed in a specified amount of time.
Synchronize with Server Upon COM Port Open;
required by NT Systems (2000, XP,
Vista, 7).
Update Routing Table Upon COM Port Open;
maintains IP route to a server in a
different subnet by modifying the IP routing table.
Enable Nagle Algorithm;
provides better network efficiency by imposing a minor latency
on the data stream while it waits to fill network packets.
Always Limit Data Rate to COM Port Baud Rate;
limits the data rate to the baud rate
