Atop Serial Device Server
SE5002D
User Manual V. 1.1
After at least one Virtual COM port is selected, the Control Panel will show,
Fig. 4. 5
.
Fig. 4. 5
The left hand side of the Control Panel shows the list of selected Virtual COM ports. Click on
Select Ports
to add or remove Virtual COM ports from the list. The right hand side of the Control
Panel shows the configurations of the selected Virtual COM port marked in blue. Each Virtual
COM port can have its own settings.
Note:
the changes to Virtual COM ports apply immediately, so there is no need to save the settings manually. However,
if the Virtual COM port is already in use, it is necessary to close the Virtual COM port and open it after the TCP
connection closes completely in order for the changes to take effect.
