Industrial Managed
Ethernet Switch – EH9711
User Manual
Page
79
of
223
list of submenus under the
Security
Network
ARP Inspection
. It contains
Port Configuration
,
VLAN Configuration
,
Static Table
and
Dynamic Table
.
Figure 2.62 ARP Inspection Menu
2.5.2.8.1
Port Configuration
To configure ARP Inspection for port(s) on the managed switch, the users can use the webpage shown in Figure 2.63. First,
enable the
ARP Inspection
by selecting the
Mode
option. Then, configure the
Mode
,
Check VLAN
and
Log Type
for each
port in the table below. Table 2.50 summarizes the descriptions of column labels of Port Mode Configuration.
Figure 2.63 Webpage
to Configure Network ARP Inspection Port
Table 2.50 Descriptions of ARP Inspection Port Configuration
Label
Description
Factory
Default
ARP Inspection Configuration
Mode
Enable the Global ARP Inspection or disable the Global ARP Inspection.
Disabled
Port Mode Configuration
Port
Port Number
-
Mode
Specify ARP Inspection is enabled on which ports. Only when both Global Mode and
Port Mode on a given port are enabled, ARP Inspection is enabled on this given port.
Possible modes are:
Enabled
: Enable ARP Inspection operation.
Disabled
: Disable ARP Inspection operation.
Disabled
Check VLAN
If you want to inspect the VLAN configuration, you have to enable the setting of "Check
VLAN". The default setting of "Check VLAN" is disabled. When the setting of "Check
VLAN" is disabled, the log type of ARP Inspection will refer to the port setting. And the
Disabled
