Industrial Managed
Ethernet Switch – EH9711
User Manual
Page
130
of
223
2.14.10
DSCP Classification
The DSCP Classification webpage as shown in Figure 2.106 allows you to configure the mapping of Class of Service (CoS)
or QoS Class and Drop Precedence Level (DPL) to DSCP value. Table 2.95 explains the options for DSCP Classification.
Figure 2.106 Webpage to Configure DSCP Classification of QoS
Table 2.95 Descriptions of DSCP Classification Configuration of QoS
Label
Description
Factory Default
QoS Class
Actual QoS class.
-
DSCP DP0
Select the classified DSCP value (0-63) for Drop Precedence Level 0.
0
DSCP DP1
Select the classified DSCP value (0-63) for Drop Precedence Level 1.
0
Click
Save
button to save the setting configuration. Click
Reset
button to keep to the original setting.
2.14.11
QoS Control List
The QoS Control List webpage as shown in Figure 2.107 shows the QoS Control List (QCL), which is made up of the QCEs
(QoS Control Entries). Each row describes a QCE that is defined. Table 2.96 describes the definition of each column in the
list. The maximum number of QCEs is 256 on each switch. To add a new entry, click on the
plus sign to add a new QCE
to the list and the webpage is updated as shown in Figure 2.108. This updated webpage allows the user to edit or insert one
single QoS Control Entry at a time. A QCE consists of several parameters as described in Table 2.97. These parameters vary
according to the frame type that the user selected.
