Industrial Managed
Ethernet Switch – EH9711
User Manual
Page
165
of
223
Table 3.6 Monitoring Descriptions of System Detailed Log
Label
Description
Level
The severity level of the system log entry.
Informational
: The system log entry is belonged information level.
Warning
: The system log entry is belonged warning level.
Error
: The system log entry is belonged error level.
ID
The ID (>= 1) of the system log entry.
Message
The detail message of the system log entry.
3.1.8
Power Status
This webpage in Figure 3.9 shows
Power Status
of the device. There are two or three powers: Power1, Power 2, and
Power3, and the power state can be either On and Off. Some models support two powers, and some models support three
powers.
Figure 3.9 Webpage to Monitor System’s Power Status
3.1.9
Digital Input
Status of Digital Input (DI) can be checked on this webpage shown in Figure 3.10. When it is "ON", the device detects the
signal from DI port. When it is "OFF", the device will not detect the signal from DI port.
Figure 3.10 Webpage to Monitor System’s Digital Input
3.2
Ports
3.2.1
State
This State webpage shown in Figure 3.11 provides an overview of the current switch port states. The port states are typically
illustrated as follows:
RJ45 ports
SFP ports
State
Disabled
Down
Link
