Industrial Managed
Ethernet Switch – EH9711
User Manual
Page
124
of
223
Figure 2.100 Webpage to Detailed Configure QoS Egress Port Scheduler and Shapers Port
Table 2.89 Descriptions of Detaled QoS Egress Port Scheduler and Shapers Port Configuration
Label
Description
Factory
Default
Scheduler Mode
Controls how many of the queues are scheduled as strict and how
many are scheduled as weighted on this switch port.
Strict
Priority
Queue Shaper
Enable
Controls whether the queue shaper is enabled for this queue on this
switch port.
Unclicked
Rate
Controls the rate for the queue shaper. This value is restricted to 100-
3281943 when "Unit" is kbps, and 1-3281 when "Unit" is Mbps. The
rate is internally rounded up to the nearest value supported by the
queue shaper.
500
Unit
Controls the unit of measure for the queue shaper rate as kbps or
Mbps.
Kbps
Rate-type
The rate type of the queue shaper. The allowed values are:
Line: Specify that this shaper operates on line rate.
Data: Specify that this shaper operates on data rate.
Line
Excess
Controls whether the queue is allowed to use excess bandwidth.
Unclicked
Credit
Controls whether the queue has credit-based shaper enabled.
Unclicked
Queue Scheduler
Weight
Controls the weight for this queue. This value is restricted to 1-100.
This parameter is only shown if "Scheduler Mode" is set to
"Weighted".
Percent
Shows the weight in percent for this queue. This parameter is only
shown if "Scheduler Mode" is set to "Weighted".
Port Shaper
