ATN Zebra 16, Operator'S And Safety Manual

Page: 69 / 80

OPERATOR AND SAFETY MANUAL
1NO0035UK-05
Zebra 16 69
- Speed reductions
- End of Run Arm 1 reduction
- End of Run Arm 2 reduction
- Arm 2 reduction - Telescope out
- Arm 2 red Orientation
- Orientation red Arm 2
- Arm 1/2 reduction - Telescope out
- Orientation red Drive
- Service
- New Time Counter
- Revisions interval
-NOTE-
For each parameter, the RESET (F2) function lets you restore a
corresponding "RAW" value. These values may vary from the factory-set
values which are specific to each machine.
It is always preferable to use the factory-set values rather than these "raw"
values.
Paragraph 8-4 indicates how to access these values which are stored in the
memory by the system. Simply set each parameter with the values
indicated.
8.3.2 INFO
– RECORDS (LOGS)
The system saves each command and each "system fault".
Certain data concerning the machine's usage rate or certain functions is also saved to plan any
preventive maintenance operations.
Press [F4].
Press [F3].