manualshive.com logo in svg

ATN Thermal Entry Wizard, Manual

Share
Download
ATN Thermal Entry Wizard Manual Download Page 8

14

15

6 . Use 2 supplied screws (SC-M4

×

14 .5TP10-SUS) to secure the device and 

the mounting plate .

NOTE

When the screw’s head is beneath the device surface, the device is 

secured.

Figure 3-3. Secure Device

NOTE

The installation height here is the recommended height. You can 

change it according to your actual needs.

For easy installation, drill holes on mounting surface according to the 

supplied mounting template.

3.3. SURFACE MOUNTING

Steps

1 . According to the datum line on the mounting template, stick the mounting 

template on the wall or other surface, 1 .4 meters higher than the ground .

2 . Drill 5 holes on the wall or other surface according to the mounting tem-

plate .

Figure 3-4. Mounting Template

3 . Insert the screw sockets of the setscrews in the drilled holes .

Figure 3-5. Insert Screw Socket

4 . Align the 6 holes to the mounting plate with the drilled holes .
5 . Route the cable through the cable hole of the mounting plate, and connect 

to corresponding external devices’ cables .

6 . Align the device with the mounting plate and hang the device on the 

mounting plate .

Summary of Contents for Thermal Entry Wizard

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands