58
59
Password
Enter the device password .
CAUTION
The password strength of the device can be automatically checked.
We highly recommend you change the password of your own choosing
(using a minimum of 8 characters, including at least three kinds of fol-
lowing categories: upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in
the high security system, changing the password monthly or weekly can
better protect your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
6 . Optional: Check Transmission Encryption (TLS) to enable transmission
encryption using TLS (Transport Layer Security) protocol for security pur-
pose .
NOTE
This function should be supported by the device.
If you have enabled Certificate Verification, you should click Open
Certificate Folder to open the default folder and copy the certificate file
exported from the device to this default directory to strengthen the secu-
rity. See for details about enabling certificate verification.
You can log into the device to get the certificate file by web browser.
7 . Check Synchronize Time to synchronize the device time with the PC run-
ning the client after adding the device to the client .
8 . Optional: Check Import to Group to create a group by the device name
and import all the channels of the device to the group .
9 . Finish adding the device .
• Click Add to add the device and back to the device list page .
• Click Add and New to save the settings and continue to add other device .
Add Device by ISUP Account
For access control devices supports ISUP 5 .0 protocol, you can add them to
the client by ISUP protocol after entering device ID and key, if you have config-
ured their server addresses, port No ., and device IDs .
Before You Start
Make sure the devices have connected to the network properly .
Steps
1 . Enter Device Management module .
The added devices are displayed on the right panel .
2 . Click Add to open the Add window .
3 . Select ISUP as the adding mode .
4 . Enter the required information .
Device Account
Enter the account name registered on ISUP protocol .
ISUP Key
For ISUP 5 .0 devices, enter the ISUP key if you have set it when configuring
network center parameter for the device .
NOTE
This function should be supported by the device.
5 . Optional: Check Synchronize Time to synchronize the device time with
the PC running the client after adding the device to the client .
6 . Optional: Check Import to Group to create a group by the device name
and import all the channels of the device to the group .
7 . Finish adding the device .
• Click Add to add the device and go back to the device list .
• Click Add and New to save the settings and continue to add other device .
8 . Optional: Perform the following operation(s) .
Device Status
Click
on Operation column to view device status .
Edit Device
Information
Click
on Operation column to edit the device information,
such as device name, device account, and ISUP key .
Check Online User
Click
on Operation column to check the online users who
access the device, such as user name, user type, user's IP
address, and login time .
Refresh
Click
on Operation column to get the latest device
information .
Delete Device
Select one or multiple devices and click Delete to delete the
selected device(s) from the client .
Import Devices in a Batch
You can add multiple devices to the client in a batch by entering the device
parameters in a pre-defined CSV file .
Steps
1 . Enter the Device Management module .
2 . Click Device tab on the top of the right panel .
3 . Click Add to open the Add window, and then select Batch Import as the
adding mode .
4 . Click Export Template and then save the pre-defined template (CSV file)
on your PC .
5 . Open the exported template file and enter the required information of the
devices to be added on the corresponding column .
NOTE
For detailed description of the required fields, refer to the introduc-
tions in the template.
Adding Mode
Enter 0 or 1 or 2 .
Address
Edit the address of the device .
Port
Enter the device port number . The default port number is 8000 .
User Name
Enter the device user name . By default, the user name is admin .
