ATN MYGALE 23, Translation From The Original Manual

Page: 36 / 62

OPERATOR AND SAFETY MANUAL
1NO0040UK-01
Mygale 23
36
DANGER
DRIVE THE PLATFORM IN
TRANSPORT POSITION ONLY ON
EVEN,
FIRM AND HORIZONTAL
SURFACES..
TO PREVENT ANY TILTING HAZARD,
DO NOT DRIVE THE MACHINE NEAR
HOLES OR ON A SLOPE OR TILT
GREATER
THAN THE VALUES
INDICATED IN SECTION 2. .
WHEN DRIVING, DO NOT TEAR,
UNPLUG
OR DRIVE OVER THE
ELECTRIC CABLE SUPPLYING THE
ELECTRIC MOTOR.
MOTOR SPEED 4.3.2
The electric motor has only one speed. Selecting
mode or has not influence on the
operating mode of the machine
.
SAFETIES OF THE ELECTRIC MOTOR 4.3.1
The safety of the electric motor is ensured by a
thermal circuit breaker.
DRIVE - STEERING 4.4.

Drive
1- Select the work platform control station and
start the electric motor or the heat engine.
2- Select the drive speed best adapted. Refer
to Section 2.3. CRUSHING AND
COLLISION HAZARDS
3- Joystick in neutral position, activate the
enable button on the mobile upper control
station or the enable pedal in the work
platform.

Within 5 seconds, push both drive joysticks
forward to drive forward or pull both
joysticks to the rear to reverse. The drive
speed is proportional to the course of the
joysticks. If both joysticks are not activated
with the same course, the machine will
drive sideways (refer to Section 4.4.Drive
–
Steering). If the movement is not controlled within 10 seconds, the button must be activated
again.

To stop the movement, return both joysticks to neutral to reduce the speed.
-NOTE-
When the structure is rotated beyond 90° the drive controls are reversed.
The black and white directional arrows on the pictogram in front of the joystick and those
on the machine's chassis are used to identify the drive direction in relation to the direction
in which the joystick is moved: activate the joystick in the direction indicated by the arrow
corresponding to the drive direction desired.

Steering
To steer the machine, you have 6 different combinations:
1- Left track control joystick pushed and right track control joystick pulled: the machine will turn
on itself clockwise.
2- Left track control joystick pulled and right track control joystick pushed: the machine will turn
on itself anticlockwise
DANGER
THE MACHINE’S ROTATION MAY
DAMAGE THE GROUND. ENSURE THE
MACHINE IS NOT OPERATED ON
LOOSE GROUND AND CHECK THE
TRACK CONDITION WHEN USING THE
MACHINE INSIDE.
IF USED ON FRAGILE GROUNDS
CHECK FOR STONES STUCK IN THE
TRACKS.