ATN MYGALE 23, Translation From The Original Manual

Page: 11 / 62

OPERATOR AND SAFETY MANUAL
1NO0040UK-01
Mygale 23
11
CHARACTERISTICS Mygale 23
Max. working height 22.85 m
Max. floor height 20.85 m
Min. floor height 0.40 m
Max. outreach (at centerline) 11.00 m
Max working outreach (at centerline) 11.25 m
Structure orientation 352° (Non continu- 2x176°)
Work platform rotation 2x 90°
Work platform dimensions 0.73 x 1.19 m
Max number of people on the platform 2
Platform rated load 230 kg
Max. wind speed 12.5 m/s (45 km/h)
Max manual force 400 Newton
Max. longitudinal slope permitted 32%
Max. side slope permitted 15%
Overall length (Transport position) 6.68 m
Overall length (Storage position) 5.55 m
Overall width 1.18 m
Overall height 1.99 m
Wheelbase 1.42 m
Ground clearance (middle of chassis) 0.17 m
Travel speed
Fast 1.5 km/h
Slow 0.5 km/h
Empty weight 3 450kg
Floor load on one outrigger
(*)
Force 8880 N
Contact pressure 1.7 kg/cm²
(*) : The floor load values indicated may vary depending on the configuration/position of the
machine. an adequate safety margin with respect to these values should always be kept..
The weighted acoustic pressure level A on the platform's control station is 78 dB(A).
The weighted acoustic power level emitted by the
machine (L
WA
) is 104 dB (test method
according to European directive 2000/14/CE relating to noise emissions in the environment of
equipment intended to be used outside buildings
– Appendix III, Section B, Points 0 and 1).
The total value of the vibrations to which the hand-arm system is exposed does not exceed 2.5m/s².
The average maximum quadratic value weighted by the acceleration frequency to which the whole
body is exposed does not exceed 0.5m/s².
Due to constant improvements made to its products, reserves the right to alter their
specifications and equipment without notice
.