ATN MYGALE 23, Translation From The Original Manual

Page: 15 / 62

OPERATOR AND SAFETY MANUAL
1NO0040UK-01
Mygale 23
15

Do not transport panels or large elements when the machine is used outdoors: these elements
increase the wind surface and reduce the machine's stability.

Do not pull or push an element outside the work platform. Acceptable manual force (total): 400N

Do not use the machine as a crane.

Do not use the machine to pull or push any objects.

Do not attach the machine to any neighbouring structure. Never use any part of the machine to
stabilise or support any structure. Do not attach any electrical wires or other cables to the
platform.
CRUSHING AND COLLISION HAZARDS 2.3.

When the machine is moving, keep all
parts of the body inside the platform
guard rail.

Prevent any obstacles from hitting or
hindering the controls or people
onboard the platform.

Make sure that you do not lower the
platform onto any tall obstacles. It is
recommended that you retract the
telescope before lowering the platform.

Warn the other occupants of the
platform before controlling a movement
and
obtain their approval where
necessary.

Make sure that non-operating personnel are kept out of the area where the machine is working.
Warn personnel on the ground to keep away from under the platform when it is raised.

Make sure that the operators of other machines at a height and on the ground are alerted to the
lifting platform's presence. If necessary, barricade the area where the machine is working and
cut the power to overhead cranes.

Note the presence of any obstacles around, above and below the platform before controlling a
movement.

Adapt the movement speed according to the condition of the ground, the incline, the visibility,
the presence of people in the working area, obstructions on the machine's route and any other
factors likely to cause a collision or injury.

Be guided by a person on the ground when visibility is reduced.

Take into account the braking or stopping distances according to the movement speed. Reduce
speed when moving on slopes (platform in low position).

The wearing of protective equipment is recommended.

When using the mobile upper control box, unfold the spiral cord to the maximum to be as far
away as possible from the machine (platform, tracks…) and from the moving parts (engine,
structure…).