Atmos EasySolar Installation Instructions Evacuated Tube Collector
20
4.13 Evacuated tube collector on flat roof
•
Assemble the frame. There are different options with regard to the angle of the
collector. The lowest possible angle is 35°.
•
Place rubber tiles for roof protection underneath the frame.
•
The horizontal L profiles for the ballast are needed when ballast is used. Ensure that
the L profiles are secured under the ballast and cannot slide free.
Fit the header to the frame and insert the glass tubes.
Ensure that the header is level
.
This is necessary so that the water in the header drains back correctly. Apply the contact
paste to the metal ends of the glass tubes. Soapy water can be used to make it easier to
slide the glass tubes into the sockets on the header.
