Atmos EasySolar Installation Instructions Evacuated Tube Collector
18
•
Fit the compression elbows to the pipes coming out at the rear of the header.
•
Connect the red and blue collector pipes and take these through the pipe gland.
Ensure that
AT ALL POINTS THE PIPES SLOPE DOWN
away from the collector
header.
•
Fit the pipe insulation to the red and blue collector pipes.
•
Ensure that there is enough slack in the pipes for thermal contraction (max 5%).
•
Stick the wakaflex to the tiles.
•
Fit the evacuated tubes and the fixing cups. Apply the heat transfer paste to the metal
ends of the glass tubes. Using soapy liquid on the ends of the glass tubes will make it
easier to slide them in.
Fixing cup:
