35
Fig. 39.
Changing the rinsing container
6.6
Changing the rinsing container
Please switch off the unit before removing the rinsing
container.
To replace the rinsing container, push it all the way up and
swing it out together with the level switch. The container
must be lifted over the edge of the holder.
The container can then be withdrawn obliquely down-wards
and outwards.
To insert the container, swing the level switch upwards.
The container is pushed obliquely upwards to the stop,
swung over the edge of the holder and pushed down into
the insert (see fi g. 39).
6.5
Changing the halogen bulb of the
counter-mirror lamp
Allow the lamp to cool down before changing it!
Pull out the plug of the halogen counter-mirror lamp.
The halogen bulb is located under two glass disks, which
are held with a snap ring.
To release the snap ring insert a small screwdriver under
the nose of the snap ring and lift it out.
Lift out the two glass disks.
Remove the refl ector of the halogen lamp.
When you insert the new lamp make sure that you do not
touch the refl ector with your bare fi ngers but use a clean
cloth.
6.0 Maintenance and servicing
