33
Fig. 37.
Removing the heat
Fig. 36. Mirror quick-heater
Grid
6.3
Changing the heating coil of the
mirror quick-heater
Grid and sleeve might get very hot. Allow them to cool
down before changing the heating coil !
Set main switch of the ENT unit to OFF
(
, fi g. 1, page 7).
Remove grid (
, fi g. 36).
Pull out the heating coil (
, fi g. 37) located under the grid
along with its plug connections.
Insert a new heating coil and make sure that the three
heating helices come into contact only with their ends.
Fix the grid again and set main switch to ON.
6.0 Maintenance and servicing
