Atmel ICE50, User Manual

Page: 21 / 74

General Description
ICE50 User Guide 3-7
2523A–AVR–11/02
3.4.1.1 Connecting the
Personality Adapter
to the Probe When connecting the Personality Adapter and the Probe, make sure that the Probe is
connected with the correct orientation. The connectors will only fit when the boards have
the correct orientation. On the Personality Adapters a circle indicates pin 1. Make sure
that the circle on the Probe matches the circle on the Personality Adapter as shown in
Figure 3-8.
Figure 3-8. Connecting Personality Adapter to Probe
3.4.2 t26 Personality
Adapter The t26 Personality adapter is a PDIP adapter for t26 devices. The footprint is a stan-
dard 20-lead 0.300" wide, PDIP package. If the target uses another package type, an
additional adapter has to be purchased from a third party vendor. When connecting the
Personality Adapter to the Probe, make sure to align the circles on the Probe and Per-
sonality Adapter as shown above.
Figure 3-9. t26 Personality Adapter
(1)
Note: 1. SNR: A9902.3.1370.A
3.4.2.1 Supported Devices ATtiny26