Atmel ICE50, User Manual

Page: 69 / 74

Trace
ICE50 User Guide 7-15
2523A–AVR–11/02
Figure 7-8. Trace Window Output
7.6 Reset (ICE50
Trace)
An External Reset, BOD (Brown-out Detection) or a Watchdog Reset while Trace is
enabled will be traced in the trace window.
7.7 Save Trace
Buffer to File
(ICE50)
The Trace Buffer can be dumped to a file. This function is available from the menu File-
>Save as. Note that the trace window must be the active window.
7.8 Sleep (ICE50
Trace)
If Trace is enabled when the microcontroller enters sleep mode, sleep will be logged into
the Trace Buffer. This applies to all sleep modes. Note, however, that the Time Stamp
still counts while the microcontroller is asleep, and this can be used to measure how
long the microcontroller has been asleep when it is woken up. The trace buffer will be
filled with sleep instructions for each cycle as long as the microcontroller is in sleep
mode.