Evaluation Kit AT697F V3.0 [APPLICATION NOTE]
32
3.2
Handling
This Evaluation Kit contains sensitive electronic components which can be damaged by Electrostatic Discharges (ESD).
When handling or installing the Evaluation Kit observe appropriate precautions and ESD safe practices.
When not in use, store the Evaluation Kit in an electrostatic protective container or bag.
3.3
System requirements
The development software provided with the AT697 board/development kit is especially designed to run on Windows®
and Linux® platforms.
To run on Windows platforms, th
e Cygwin™ Unix emulation layer needs to be installed.
Cygwin-1.1.7 (or higher) is recommended on this platform.
Under Linux platform, Linux-2.4.x with glibc-2.3 (or higher) is recommended.
The minimum hardware requirements are:
Pentium® 1 Processor
128 MB RAM
100 MB Available Hard Disk Space
115200 Baud RS-232 Port (COM port)
3.4
Installing software development package
Here is a summary of the tools provided with the AT697 evaluation board/development kit:
RCC - Development suite
BCC - Development suite
GRMON - Debug monitor (only included in development kit)
Installation procedure for each tool is specified in the corresponding User Guide. Please refer to the documents
available with GRMON after installation for detailed information.