manualshive.com logo in svg

Atmark Techno Armadillo-440, Startup Manual, Page: 48 / 70

Share
Download
Atmark Techno Armadillo-440 Startup Manual Download Page 48

6.4.7.4.5.2. System Reboot

The system can be rebooted here.

Reboot the system (Reboot)

This reboots the Armadillo. Approximately 10 seconds after Figure 6.23, “AT Admin: System - Reboot” is dis-
played, the Armadillo will shutdown and then restart.

Figure 6.23. AT Admin: System - Reboot

After rebooting, if the network connection has changed the red LED on the Armadillo will activate for anywhere between

10 seconds to a number of minutes. After confirming that the LED has deactivated, access the top page on the Armadillo
again.

6.5. Using Bonjour

As Armadillo supports Bonjour, it is possible to easily find an Armadillo from a PC which also supports Bonjour and is

on the same network.

[3]

(Quoted from Apple Inc.'s web site)

About Bonjour

Bonjour, also called zero configuration networking, is a service to automatically
discover computers, devices and services on IP networks. As the world standard IP
protocol is used in Bonjour, devices can automatically detect each other without the
need to enter IP addresses or configure a DNS server.

[3]

The automatic IP address acquisition functionality of the operating system is normally used for the network configuration on the PC side. Refer to

Section 6.1, “Default Network Connection Mechanisms” for more details.

Armadillo-440 LCD Model Development Set Startup Guide

Network

48

Summary of Contents for Armadillo-440







































































Reviews:

No comments