Atmark Techno Armadillo-440 Startup Manual Download Page 21

Page: 21 / 70

fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2

fsl-ehci fsl-ehci.1: irq 37, io mem 0x53ff4000

fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

usb usb2: configuration #1 chosen from 1 choice

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 1 port detected

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

input: gpio-keys as /devices/platform/gpio-keys.0/input/input0

rtc-s353xxa 2-0030: rtc core: registered rtc-s353xxa as rtc0

⏎

Inc.i2c /dev entries driver

mxsdhci: MXC Secure Digital Host Controller Interface driver

mxsdhci: MXC SDHCI Controller Driver.

mmc0: SDHCI detect irq 159 irq 9 INTERNAL DMA

Registered led device: red

Registered led device: green

Registered led device: yellow

usbcore: registered new interface driver usbhid

usbhid: v2.6:USB HID core driver

i.MX ADC at 0x50030000 irq 46

Advanced Linux Sound Architecture Driver Version 1.0.16.

ASoC version 0.13.2

wm8978: WM8978 Audio Codec v0.2

asoc: WM8978 HiFi <-> imx-i2s-1 mapping ok

ALSA device list:

#0: armadillo440 (WM8978)

TCP cubic registered

NET: Registered protocol family 17

NET: Registered protocol family 15

Static Power Management for Freescale i.MX25

input: imx_adc_ts as /devices/virtual/input/input1

i.MX ADC input touchscreen loaded.

rtc-s353xxa 2-0030: setting system clock to 2000-01-01 00:54:26 UTC (946688066)

RAMDISK: ext2 filesystem found at block 0

RAMDISK: Loading 26797KiB [1 disk] into ram disk... done.

VFS: Mounted root (ext2 filesystem).

Freeing init memory: 128K

mmc0: new high speed SD card at address 0007

mmcblk0: mmc0:0007 SD01G 995328KiB

mmcblk0: p1 p2

init started: BusyBox v1.00 (2010.03.09-06:07+0000) multi-call binary

Starting fsck for root filesystem.

fsck 1.25 (20-Sep-2001)

ext2fs_check_if_mount: No such file or directory while determining whether /dev/

⏎

ram0 is mounted.

/dev/ram0: clean, 1039/1248 files, 24153/26797 blocks

Checking root filesystem: done

Remounting root rw: done

Mounting proc: done

Mounting usbfs: done

Mounting sysfs: done

Cleaning up system: done

Running local start scripts.

Starting udevd: done

Loading /etc/config: done

Armadillo-440 LCD Model Development Set Startup Guide

Startup and Shutdown

Summary of Contents for Armadillo-440







































































Search results

Summary of Contents for Armadillo-440

Reviews:

Atmark Techno Armadillo-440, Startup Manual, Page: 21 / 70

Search results

Summary of Contents for Armadillo-440

Reviews: