AT-OMNI-232
16
Adjust audio and line settings
Input Volume
Adjusts the audio gain on the input side
•
Selections = -16.9, -1.9, 0.0, 15.0, 13.1, 30.0, 28.1, and 45.0
MIC Phantom power
Select to pass power to a Phantom Power MIC
•
Default is off, to ensure no MICs are accidently damaged when plugged in
Output Volume
Adjust output volume
•
Settings are from -60 to 0
Mute
Select the checkbox to mute or unmute the output volume
Blink Timer
:
Sets the amount of time the front panel PWR LED will blink for - This helps to find the correct unit when
multiple are present.
•
Settings are from 0 (not blinking) to 65535 (ms)
Blink button
:
Press this button to initiate the front panel PWR LED blinking
Reset
Resets the OMNI-232 to factory settings
NOTE:
Settings cannot be saved unless both output volumes have a value set
AMS
Channel Settings
General Settings
