AT-GAIN-60
34
Appendix
Mounting two AT-GAIN-60 units
1. Turn the AT-GAIN-60 so that the bottom of the unit is facing upward.
2.
Locate the two sets of holes on either side of the unit. Refer to
Rack Mount Installation (page 32)
for the
location of the mounting holes.
3. Mount each of the AT-GAIN-60 units in the rack. Match the mounting holes on the bottom of each AT-GAIN-60
with the holes marked in the illustration below.
The following provides an alternate method for mounting AT-GAIN-60 units closer together. This option provides
extra space in the AT-RACK-1U for cabling, etc.
Front of rack tray
TOP
4. Install the rack tray in the rack shelf and secure the rack tray with two screws on either side.
IMPORTANT:
To prevent possible damage
to the device, rack, and/or screws, do not
overtighten or use high-torque devices
when securing the devices to the rack.
