AT-GAIN-60
20
Basic Operation
1. Click the
ENABLE
option, if it is not selected.
2. Set the time interval, which must elapse, before the AT-GAIN-60 powers-down. The default setting is 15 minutes.
3. Click the
Save
button.
Factory Reset
If necessary, the AT-GAIN-60 can be reset to factory-default settings. Press and hold the
RESET
button on the back
panel, using the end of a paper clip or other pointed object, for 10 seconds to reset the AT-GAIN-60 to factory-default
settings. Note that the AT-GAIN-60 will be placed in DHCP mode, as part of the reset procedure. The AT-GAIN-60
can also be reset through the web GUI. Refer to the
Control page (page 27)
for more information.