Operation Instructions
39
PV-15PX
Operation Instructions
Please read the safety tips carefully before operating the lift.
To lift vehicle
1. Keep the lift area free of clutter;
2. Position lift arms to the lowest position;
3. Open lift arms;
4. Position vehicle between columns;
5. Move arms to the vehicle’s lifting points;
Note: The four lift arms must make contact at the same with the
vehicle’s lifting points and both axles must rise off of the ground at the
same time.
6. Press the UP button until the lift pads contact underside of vehicle. Check to
make sure vehicle is secure;
7. Continue to raise the lift slowly to the desired working height, ensuring the
balance of vehicle;
8. Push lowering handle to lower lift onto the nearest locks. The vehicle is ready
to repair. Note: The lift must always be on the safety locks!!!!!
To lower vehicle
1. Keep the lift area free of clutter;
2. Press the button of UP to raise the vehicle slightly, and then release the
safety device, lower vehicle by pushing lowering handle.
3. Open the arms and position them to the shortest length.
4. Drive away the vehicle.
Summary of Contents for PV-15PX
Page 32: ...PV 15PX Exploded View 33 PV 15PX PV 15PX Exploded View Fig 40 ...
Page 33: ...PV 15PX Exploded View 34 PV 15PX Cylinders Fig 41 ...
Page 34: ...PV 15PX Exploded View 35 PV 15PX ATLAS Manual power unit Fig 42 220V 60HZ Single Phase Fig 42 ...
Page 35: ...PV 15PX Exploded View 36 PV 15PX Illustration Of Hydraulic Valve Fig 43 ...
