Atlas Copco XRVS 1350, Instruction Manual

Page: 46 / 136

- 46 -
Locate the rear-end of the compressor upwind, away
from contaminated wind-streams and walls. Do not
obstruct air evacuation from the cooling system.
Avoid recirculation of exhaust air from the engine
and hot air from the cooler pack. This can cause
overheating and engine power decrease. Uncouple vehicle.
Apply parking brake by moving the lever (1) in the
direction of the arrow.
Connect the safety chain (2) to the eyes (3) on the
towbar (4). You can move the towbar (4) upwards and
secure it by connecting the chain (5) to the eye (6).
Place the compressor as level as possible; however, it
can be operated temporarily in an out-of-level
position not exceeding 15°. If the compressor is
parked on sloping ground, immobilize the compressor
by placing wheel chocks (available as option) in front
of or behind the wheels.
TANDEM EU
When removing the compressed air hoses, the
compressor's service brake is activated automatically.
Please pay attention to the sequence in which you
disconnect the air lines.
1. Release the compressed air hose for the truck’s
feed line (red).
2. Release the compressed air hose for the truck’s
control (yellow).
Mount the coupling heads on the brackets on the
towbar.
For that purpose position the coupling's head with its
hole on the button. Turn the coupling's head anti-
clockwise as far as it will go.
Unplug the ABS and electric plugs. Plug these into
the towbar mountings.
(5)
(6)
(1)
(4)
(3)
(2)