Atlas Copco QAS 60 Pd, Instruction Manual

Page: 19 / 142

- 19 -
2.4 Electrical features
The electrical features described in this chapter are
standard provided on this generator. For all other
electrical features, see “Overview of the electrical
options” on page 91.
2.4.1 Control and indicator panels
To operate the generator, one of the following control
panels is installed.
2.4.1.1 Qc1002™ controller
General description Qc1002™ control panel
A1 ....... Qc1002™ display
F10 ......Fuse
The fuse activates when the current from the
battery to the engine control circuit exceeds
its setting. The fuse can be reset by pushing
the button.
H0 ....... Panel light
S2 ....... Emergency stop button
Push the button to stop the generator in case
of an emergency. When the button is
pressed, it must be unlocked, before the
generator can be restarted. The emergency
stop button can be secured in the locked
position with the key, to avoid unauthorized
use.
S20 ..... ON/OFF/REMOTE switch
To start up the unit (locally or remote).
X25 ..... Terminal strip
Qc1002™ Module
The Qc1002™ module is located inside the control
panel. This control module will carry out all
necessary tasks to control and protect a generator,
regardless of the use of the generator.
This means that the Qc1002™ module can be used for
several applications.
Qc 1002
145
X25
S20
F10
A1
S2
S4
H0
Qc 1002
145